AC600 Wireless Outdoor Wi-Fi Booster

About this product The Wi-Fi signal booster uses next-generation 802.11AC Wi-Fi technology, and the dual-band external antenna provides speeds of up to 2.4 GHz (150 Mbps) and 5 GHz (433 Mbps). It effectively solves weak signal problems and helps improve Wi-Fi signal strength. 2 ...About this product The Wi-Fi signal booster uses next-generation 802.11AC Wi-Fi technology, and the dual-band external antenna provides speeds of up to 2.4 GHz (150 Mbps) and 5 GHz (433 Mbps).

It effectively solves weak signal problems and helps improve Wi-Fi signal strength. 2 detachable 7d - Bi omnidirectional external antennas: 2 RP-SMA connectors, higher antenna gain, greatly strengthen Wi-Fi signals, expand outdoor coverage, stability technology uses its channel selection function to automatically avoid channel conflicts, meet the requirements of outdoor long-range coverage wireless network The built-in PA+LNA 600m - W high-power amplifier and the optimized receiver increase transmission power fivefold. With stronger penetration and wider coverage than conventional access points, it is ideal for providing Wi-Fi services in large areas (factories, neighborhoods, streets, etc.).

Power over Ethernet: The outdoor Wi-Fi access point incorporates Power over Ethernet (PoE) technology, allowing it to be installed where electrical outlets are difficult to access, combining power and network connections over a single RJ-45 cable. Multiple Operation Modes: Supports wireless repeater, router, and access point modes. Withstands Harsh Outdoor Climates: IP65 weatherproof housing ensures continuous operation in harsh outdoor environments or in extremely cold, hot, or continuously humid climates; rugged weatherproof housing withstands harsh outdoor conditions; withstands a wide range of humidity and temperature (-30°C~70°C (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensures a stable connection in harsh outdoor conditions.

- Fi Range Extender - Extend Fast AC Wi - Fi - Anywhere. - Fi range extender is designed for WISP CPEs, making it an ideal solution for small businesses, offices, and homes with outdoor network requirements. It has a wireless transmission power of up to 1000 m - W and features a built-in 2x7 d - Bi detachable omnidirectional antenna that provides an effective way to capture and maintain a stable signal over hundreds of meters of wireless network connection.

Thanks to the adoption of high-power amplifiers and two omnidirectional antennas with two frequency bands, the extender significantly strengthens the Wi-Fi signal and expands the coverage outdoors, ensuring that you can also access the Internet when you walk around your house. How it works - Outdoor Wi-Fi Repeater with Ethernet Port -Place the straps through the slots on the back of the AP and then around the pole. Tighten the straps.

-Connect one end of a LAN cable to the POE port of the included power injector and the other end of the LAN cable to the LAN port of the access point. -Connect the LAN port of the power injector to the PC using another LAN cable. -Plug the power adapter into a wall outlet.

This upgraded, weatherproof version of the outdoor wireless Wi-Fi extender has built-in Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlets are not readily available. - Note: - Note: - Make sure to use a cable. class="a-text-bold">CAT5e/CAT6 Ethernet - Certified with RJ45 connectors.

Make sure the Ethernet cable length is less than60 meters (196 feet). Not compatible with mesh routers. Select the wireless network with a signal strength above 70% for the most reliable connection.

The outdoor antenna should be installed at a height of 2 meters above the roof or in a high, open location for better reception. Indoor/outdoor use The case Robust and weatherproof, IP65 rated, withstands harsh outdoor conditions. The rugged and weatherproof housing protects the access point from harsh outdoor conditions and ensures a stable wireless connection.

Its discreet appearance blends seamlessly into any indoor environment. The temperature resistance ranges are -22 ~ 158°F (-30 ~ 70°C). Built-in surge protector (15 k - V ESD), 4 k - V lightning protection.

Key parts are covered with waterproof glue to prevent water infiltration. Extend Wi-Fi Coverage Eliminate Wi-Fi dead zones, professional outdoor design. External RP-SMA connector.

It works with any standard Wi-Fi router and creates stronger dual-band connections in hard-to-reach areas. With its centralized management platform and high degree of flexibility, it is the ideal choice for providing point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage. Dual-Band Wi-Fi Repeater IEEE 802.11 a/b/g/n/ac standards.

Dual-band speed up