Adafruit Triple-Axis Accelerometer

The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. The lower range gives more resolution for slow movements, the higher range is good for high ...The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing.

You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. The lower range gives more resolution for slow movements, the higher range is good for high speed tracking. The ADXL345 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices.

The VCC takes up to 5V in and regulates it to 3.3V with an output pin. Fully assembled and tested. Comes with 9 pin 0.1" standard header in case you want to use it with a breadboard or perfboard.

Two 2.5mm (0.1") mounting holes for easy attachment. Dimensions (without header): This board/chip uses I2C 7-bit address 0x53 Revision History: As of June 13, 2022 - This breakout may come with a different regulator than AP2112K due to parts shortages. The regulator can provide at least 100mA.

The physical shape and pinout have changed, however functionality and schematic are identical