Tlily Remote Transmitter and Receiver Board

[Frequency]: 40MHZ [Fire panel working voltage]: 3V; [Receiving board working voltage]: 4.5-6V; [Receiving board maximum output voltage]: 4 lines, 2 groups, 2 sets, two output voltages, the size is about 2V-3.5V, respectively control a motor forward and reverse, a 3V voltage motor ...[Frequency]: 40MHZ [Fire panel working voltage]: 3V; [Receiving board working voltage]: 4.5-6V; [Receiving board maximum output voltage]: 4 lines, 2 groups, 2 sets, two output voltages, the size is about 2V-3.5V, respectively control a motor forward and reverse, a 3V voltage motor can be used. [Features]: The two voltages of the output may have different sizes. When the battery is low, this may be obvious.

Therefore, it is recommended to use the small voltage separately for the steering motor. The remote control distance is sufficient when the power is sufficient. , interference, after correctly connecting the antenna, about 10 meters, the above is for reference only.

[Wiring]: (1) The transmitting board: the red line V+ is connected to the positive pole of the power supply, the black line V- is connected to the negative pole of the power supply, and the ANT is connected to the antenna; (2) Receiving board: the black line is connected to the negative pole of the power supply, the red line is connected to the positive pole of the power supply; The yellow line is connected to a blue line to connect a motor (two long wires are connected to motor 1 and two short wires are connected to motor 2). Color: Orange Material: Metal + Plastic Size: Launch Board: 3.8 x 5.8cm Receiver Board: 2.6 x 4.3cm Package Contents: 3 x 40Mhz Transmitter Board 3 x 40Mhz Receiver Board 6 x Antenna 6 x Screws with Nuts Note: This version of the two-way output is basically the same, suitable for the mini motor with a blocking current below 2A, and the other 27M board in the store can be used simultaneously without interference. Only the above package content, other products are not included.

Note: Light reflection and different screens may cause the color of the item in a little different from the real thing. The measurement allowed error is +/- 1-3 cm.